6 General Tasks
To set up peripherals. 6-2
To print or plot screen contents 6-3
To save data with an internal or RAM disk 6-4
To recall data with an internal or RAM disk 6-5
To format a disk 6-6
To create a math function 6-7
To use a math function 6-8
To display a summary of instrument parameters 6-9
Inspection and Installation
7 Preparing the Analyzer for Use
Preparing the Analyzer for Use 7-2
To do the incoming inspection 7-5
To install the analyzer 7-7
To change the line-voltage selector switch 7-8
To change the fuse 7-9
To connect the analyzer to a LAN 7-10
To connect the analyzer to a serial device 7-10
To connect the analyzer to a parallel device 7-11
To connect the analyzer to an HP-IB device 7-11
To connect the analyzer to an external monitor 7-12
To connect an external frequency reference 7-12
To connect the optional frequency reference 7-13
To connect the optional keyboard 7-14
To clean the screen 7-16
To store the analyzer 7-16
To transport the analyzer 7-17
If the analyzer will not power up 7-18
Index
Documentation Road Map
Need Assistance
xii
To Next Page
Loading...
