To save data with an internal or RAM disk
You may save trace data, instrument states, trace math functions, instrument
BASIC programs, and time-capture buffers.
1 Select the default disk:
Press [
Save/Recall
], [
default disk
]
Press [
nonvolatile RAM disk
], [
volatile RAM disk
]or [
internal disk
]
2 Press [
Return
].
3 Press the softkey that matches the type of data you want to save (then select a
storage register if you are saving a trace).
4 Enter the file name if you have chosen to save to a file:
Use the hardkeys (which have now been remapped to represent the symbols
etched to the lower right of them), softkeys, knob, and numeric keys to type in a
file name.
5 Press [
enter
].
For more information on the softkeys and parameter choices, display online help.
If you are using the internal disk drive, you must insert a formatted 3.5-inch
flexible disk into the analyzer’s internal disk drive. If you want to save data but
the disk has not been previously formatted see “To format a disk.”
General Tasks
6-4
To Next Page
Loading...
Need help?
General
