Agilent Technologies 89410A - 4 Making OnOff Ratio Measurements

To create a math function
In this section you learn how to create a math function which inverts a signal.
1 Initialize the analyzer:
Press [
Preset
]
2 Define a constant:
Press [
Math
], [
define constant
], [
define K1
]
Press [
real part
], 1, [
enter
], [
imag part
], 0, [
enter
].
3 Define a math function:
Press [
Math
], [
define F1
]
[
constant
], [
K1
], [
/
], [
meas data], [spectrum] [enter
].
A math function remains in memory through a Preset but will be erased when
you power down the analyzer. If you want to preserve the math function for
future use, save it in the non-volatile RAM or on an internal disk.
You can create up to 6 functions and 5 constants
General Tasks
6-7