Key Reference
A
Chapter 5114
AM Tone 2 Rate
Supported PSG-A Series
This softkey enables you to set the internally generated modulation frequency for the
amplitude modulation tone 2 of the dual-sine AM waveform.
Preset 400.0 Hz
Range 0.5 Hz
−
1.0 MHz (minimum increment allowed is 0.5 Hz)
Location Page 231
Remarks None
AM Type Lin Exp
Supported PSG-A Series
This softkey enables you to set the amplitude modulation type to linear (percent/volt) or
exponential (dB/volt).
Preset Lin
Choices Lin or Exp
Location Page 230
Remarks None
AM Waveform
Supported PSG-A Series
Use this softkey to access a menu of choices that enables you to select an amplitude
modulation waveform that can be produced by the internal modulation source.
Preset Sine
Choices Sine Noise Triangle Square
Dual-Sine Ramp Swept-Sine
Location Page 230
Remarks The waveform selection applies only to whichever AM path
configuration you have currently selected. Dual-Sine and
Swept-Sine are available for Internal 1 source only.
To Next Page
Loading...
Need help?
General
