Fundamental Operation
Using Table Editors
Chapter 250
Table Editor Softkeys
The following table editor softkeys are used to load, navigate, modify, and store table item
values. Press
More (1 of 2) to view additional table editor softkeys.
Edit Item displays the selected item in the active function area of the display where
the item’s value can be modified
Insert Row inserts an identical row of table items above the currently selected row
Delete Row deletes the currently selected row
Insert Item inserts an identical item in a new row below the currently selected item
Delete Item deletes the item from the bottom row of the currently selected column
Goto Row opens a menu of softkeys (Goto Top Row, Goto Middle Row, Goto Bottom Row,
Page Up, and Page Down) used to quickly navigate through the table items
Page Up and
Page Down display table items that occupy rows outside the limits of the ten-row table
display area
Load/Store opens a menu of softkeys (Load From Selected File, Store To File, Goto Row,
Page Up, and Page Down) used to load table items from a file in the memory
catalog, or to store the current table items as a file in the memory catalog
For more information on loading and storing files, see “Using Data Storage
Functions” on page 44.
Modifying Items in the Table Editor
To modify existing table items:
1. Use the arrow keys or the knob to move the table cursor over the desired item.
2. Press
Edit Item.
The selected item is displayed in the active function area of the display.
3. Use the knob, arrow keys, or the numeric keypad to modify the value.
4. Press
Enter.
The modified item is now displayed in the table.
To Next Page
Loading...
Need help?
General
