Key Reference
P
Chapter 5 193
Power Search
Supported All
Use this softkey to access the
Power Search Manual Auto softkey. Power search is an
internal calibration routine that improves output power accuracy when the ALC is off.
Power Search Manual Auto
Supported All
This softkey toggles the power search mode between auto and manual. Power search is
an internal calibration routine that improves output power accuracy when the ALC is
off. When you set Power Search to Auto, power search will execute automatically with
each change to the RF frequency or power. When you set Power Search to Manual, the
power search routine is executed when the
Do Power Search softkey is pressed.
Preset
Supported All
This hardkey enables you to set the signal generator to a known state which can be
either the factory-defined state or a user-defined state. Refer to “Preset Normal User” on
page 194.
Preset N/A
Range N/A
Remarks None
Preset N/A
Range N/A
Location Page 232
Remarks The
ALC Off On softkey must be set to Off in order to
engage power search mode.
Preset Manual
Choices Manual Auto
Location Page 232
Remarks The
ALC Off On softkey must be set to Off in order to
engage either power search mode.
To Next Page
Loading...
Need help?
General
