Key Reference
L
Chapter 5178
LF Out Tone 2 Freq
Supported PSG-A Series
This softkey enables you to change the alternate frequency of the internally generated
modulation source. The alternate frequency is the second frequency in dual-sine or the
stop frequency in swept-sine.This key is coupled to the
LF Out Freq softkey in the initial
LF Out menu and the
LF Out Stop Freq softkey in the LF Out Swept-Sine menu.
Preset 400.0 Hz
Range 0.5 Hz
−
1.0 MHz (minimum increment allowed is 0.5 Hz)
Location Page 240
Remarks This softkey is active only when you have selected the internal source
to operate as Function Generator 1.
LF Out Waveform
Supported PSG-A Series
Use this softkey to access a menu of choices that enables you to select the LF output
waveform for your LF function generator.
Preset Sine
Choices Sine Noise Triangle Square
Dual-Sine Ramp Swept-Sine DC
Location Page 240
Remarks This key is active only when you have selected the internal
source to operate as a function generator. Dual-Sine and
Swept-Sine are available only when you have selected the
internal source to operate as Function Generator 1.
To Next Page
Loading...
Need help?
General
