27
Site Requirements and Specifications
2
Physical Specifications
Physical Specifications
Tabl e 4 Physical Specifications
Type Specification Comments
Weight 14.2 kg (32 lbs)
Dimensions
(width × depth × height)
200 × 345 × 435 mm (8 × 13.5 × 17
inches)
Line voltage 100 – 240 VAC, ± 10% Wide-ranging capability
Line frequency 50 or 60 Hz, ± 5%
Power consumption 300 VA / 200 W / 683 BTU Maximum
Ambient operating
temperature
0–55 °C (32–131 °F) See warning “” on page 27
Ambient non-operating
temperature
-40–70 °C (-4–158 °F)
Humidity < 95%, at 25–40 °C (77–104 °F) Non-condensing
Operating Altitude Up to 2000 m (6500 ft)
Non-operating altitude Up to 4600 m (14950 ft) For storing the module
Safety standards: IEC, CSA,
UL
Installation Category II, Pollution
Degree 2
For indoor use only. Research
Use Only. Not for use in
Diagnostic Procedures.
WARNING
Hot rear panel
Using the autosampler at high environmental temperatures may cause the rear
panel to become hot.
➔ Do not use the autosampler at environmental temperatures higher than 50 °C
(122 °F)
To Next Page
Loading...
Need help?
General
