78
7 Maintenance
Introduction into Maintenance and Repair
Warnings and Cautions
Using the ESD Strap
Electronic boards are sensitive to electronic discharge (ESD). In order to
prevent damage, always use an ESD kit when handling electronic boards and
components. Use the ESD kit according to recommendations given by the
supplier.
WARNING
Module is partially energized when switched off, as long as the power cord is
plugged in.
Repair work at the module can lead to personal injuries, e.g. shock hazard, when the
cover is opened and the module is connected to power.
➔ Make sure that it is always possible to access the power plug.
➔ Remove the power cable from the instrument before opening the cover.
➔ Do not connect the power cable to the Instrument while the covers are removed.
To Next Page
Loading...
Need help?
General
