6-82 Service Guide N5242-90001
Replaceable Parts PNA Series Microwave Network Analyzers
Replaceable Parts Listings N5242A
Miscellaneous Part Numbers
Table 6-3 Part Numbers for Miscellaneous Parts and Accessories
Description
Model or Part
Number
Service Tools
1/4 inch and 5/16 inch open-end wrench, thin profile 8710-0510
5/16 inch (8 mm), open-end torque wrench; 0.9 N-m (8 in-lb) 8710-1765
20 mm open-end torque wrench; 0.9 N-m (8 in-lb) 8710-1764
Spanner wrench 08513-20014
Documentation
Installation and Quick Start Guide (for all PNA series analyzers) (Cannot be ordered. Part
number is for reference only. Must be printed from the Agilent Web site. Refer to “Printing
Copies of Documentation from the Web” on page iv.)
E8356-90001
Service Guide. (Not available in printed form. Part number is for reference only. Must be
printed from the Agilent Web site. Refer to “Printing Copies of Documentation from the
Web” on page iv.)
N5242-90001
GPIB Cables/GPIB Adapter
GPIB cable, 0.5 meter (1.6 feet) 10833D
GPIB cable, 1 meter (3.3 feet) 10833A
GPIB cable, 2 meter (6.6 feet) 10833B
GPIB cable, 4 meter (13.2 feet) 10833C
GPIB cable to GPIB cable adapter 10834A
Fuses
Rear Panel Bias Input Fuse; Ports 1, 2, 3, and 4 (0.5 A, 125 V) 2110-0046
ESD Supplies
Adjustable antistatic wrist strap 9300-1367
Antistatic wrist strap grounding cord (5 foot length) 9300-0980
Static control table mat and earth ground wire 9300-0797
ESD heel strap 9300-1126
Memory Modules
1 GB module, DDR SDRAM, 166 MHz, 184-pin 1819-0329
Upgrade Kits orderable by Part Number
Bias Tees and Source and Receiver Attenuators for 2-Port Models (Option 200 to 219) N5242-60101
2nd Internal Source, Combiner, and Source Switches for 2-Port Models (Option 219 to 224)
N5242-60102
Bias Tees and Source and Receiver Attenuators for 4-Port Models (Option 400 to 419) N5242-60103
Combiner and Source Switches for 4-Port Models (Option 419 to 423) N5242-60104
To Next Page
Loading...
