Service Guide N5242-90001 3-37
PNA Series Microwave Network Analyzers Tests and Adjustments
N5242A Adjustments
IF Gain Adjustment
The IF gain adjustment is used to adjust the IF gain of the network analyzer.
Procedure
1. Press UTILITY , then , then , then click IF Gain
Adjustment.
2. Follow the instructions and prompts as they are displayed.
Synthesizer Bandwidth Adjustment
This adjusts the bandwidth of the 13.5 GHz synthesizers.
Procedure
1. Press UTILITY , then , then , then click Synthesizer
Bandwidth Adj.
2. Follow the instructions and prompts as they are displayed.
System
Service Adjustments
System
Service Adjustments
To Next Page
Loading...
