Service Guide N5242-90001 2-7
PNA Series Microwave Network Analyzers General Product Information
N5242A Analyzer Options Available
Calibration Options
Option UK6, Commercial Calibration Certificate with Test Data
A complete set of measurements that test the analyzer to the manufacturer’s published
specifications. It includes a calibration label, a calibration certificate, and the
corresponding calibration data report. This calibration conforms to ISO 9001.
This calibration can be obtained by sending your analyzer to Agilent for calibration along
with an order for Option UK6. Refer to “Shipping Your Analyzer to Agilent for Service or
Repair”.
Option 1A7, ISO 17025 Standards Compliant Calibration
A complete set of measurements that test the analyzer to the manufacturer’s published
specifications. It includes a calibration label, an ISO 17025 calibration certificate, and the
corresponding calibration data, measurement uncertainties, and guardbands on all
customer specifications. This calibration conforms to ISO 17025 and ISO 9001.
This calibration can be obtained by sending your analyzer to Agilent for calibration along
with an order for Option 1A7. Refer to “Shipping Your Analyzer to Agilent for Service or
Repair”.
Option A6J, ANSI Z540 Standards Compliant Calibration
A complete set of measurements that test the analyzer to the manufacturer’s published
specifications. It includes both pre- and post-adjustment data with measurement
uncertainty information compliant to the ANSI/NCSL Z540 standard.
This calibration can be obtained by sending your analyzer to Agilent for calibration along
with an order for Option A6J. Refer to “Shipping Your Analyzer to Agilent for Service or
Repair”.
To Next Page
Loading...
