Agilent Technologies U1251A - Page 84

84 Agilent U1251A/U1252A User’s and Service Guide
4 Changing The Default Setting
Print
Print
ON, OFF Enables auto send of data to PC continuously
when set to ON
OFF
Menu item
Available setting options Default factory
setting
Display
Description
Display Description
rESEt
Reset
dEFAU Enables reset of factory settings by pushing and
holding for more than 1 second
dEFAU
tEMP
Te mp er atu r e
(4)
d-CF Sets temperature measurement to °C but pushing
swaps display to °F
d-CF
d-F Sets temperature measurement to °F
d-FC Sets temperature measurement to °F but pushing
swaps display to °C
d-C Sets temperature measurement to °C
NOTE
1. This is the first display once meter enters Setup mode.
2. For d-LoG and rEF menu items, push to select the digit to be
adjusted.
3. J-type thermocouple applies to U1252A.
4. To view tEMP menu item, push for more than 1 second.