Operations and Features 3
U8001A/U8002A User’s and Service Guide 19
5 Return to the meter mode.
• Press on the “Display Limit” button to return to the meter
mode. The LIMIT annunciator will be turned off.
6 Enable the output.
• Press on the “Output On/Off” button to enable the output.
• The OFF annunciator turns off and CV annunciator turns
on.
• The display is now in meter mode.
Verify that the power supply is in constant voltage mode. Ensure that the
constant voltage (CV) annunciator is on. If the constant current (CC)
annunciator is on instead, choose a higher current limit.
To Next Page
Loading...
Need help?
General
