Agilent Technologies U8002A User Manual

Operations and Features 3
U8001A/U8002A User’s and Service Guide 27
To disable the OCP
1 Press on the “Over Current” button to disable the OCP. The
OCP annunciator will eventually turn off.
To clear the over current condition
1 OCP trip can only occur when the output is enabled. When
the OCP condition occurs:
• The output is disabled and the OFF annunciator will be
turned on.
• If the keylock feature was enabled, it will be disabled. The
LOCK annuciator will be turned off.
• The OCP annunciator will fast- blink continuously.
• The display will show “TRIP”.
2 To clear the OCP trip conditon, press on the “Over Current”
button again.
NOTE
If OCP trip persists, decrease the current limit settings to clear the tripping.

Agilent Technologies U8002A Specifications

General

Brand	Agilent Technologies
Model	U8002A
Category	Power Supply
Language	English