Aiphone GT SERIES - ENTERING ENTRANCE AND GUARD STATION INFORMATION FOR MCX; Programming Entrance Station Details in MCX Sections; Programming Guard Station Details in MCX Sections

21
PROGRAMMING: ENTERING ENTRANCE STATION AND GUARD STATION INFORMATION
Programming Entrance/Guard Information
Step 1: Click the MCX1(Tenant Section), then select Entrance Info. Enter the Section ID, Entrance ID (2-16),
Entrance #, and Entrance Name (not required) for each entrance station in the system. Ensure that the
Section ID is correct in relation to which section the entrance station resides.
The GT-MCX uses Entrance ID 1 for each section.
Step 2: Click Guard Info. Enter the Section ID, Guard ID (2-4), Guard #, and Guard Name (not required) for each
guard station in the system. Ensure that the Section ID is correct in relation to which section the guard
station resides.
The GT-MCX uses Guard ID 1 for each section.
Step 3: Click Save , and then
Yes
.
Step 4: Copy the Entrance Info and Guard Info from MCX1(Tenant Section) to each of the MCX’s in the system.
Use Copy/Paste (Ctrl C, Ctrl V) to save time.