108
Configuring the Station
How to configure Daily Schedule
Configure the time at which relay output will be performed, in units of one day. A schedule one year from the set day
can be configured. 12 schedules can be set for each day.
1. Select the day for which to set a schedule from "Calendar."
2. Configure the "Start Time" and "End Time," and then click [Add].
3. When done, click [Update].
■ Start Time
Description Set the time when contact output starts.
Settings 00:00 - 23:59
Default values -
Calendar
Set schedule list
To Next Page
Loading...
Need help?
General
