93
Configuring the Station
■ Schedule Settings
Configure this if “Call Method (→page 90)” is set to "Change Destination by Schedule."
How to configure the Weekly Schedule
Configure the switchover time, call group number, and call priority for the outgoing call destination, each day from
Sunday to Saturday. 12 schedules can be set for each day.
1. Configure the "Start Time," "End Time," "Call Destination," and "Priority" for each day of the week.
2. When done, click [Update].
■ Start Time
■ End Time
■ Call Destination
■ Priority
How to delete the Weekly Schedule
1. Return settings to their default values, and then click [Update].
Description Configure the time when call group switchover begins.
Settings 00:00 - 23:59
Default values —
Description Configure the time to end call group switchover. If this is set earlier than “Start Time
(→page 93)”, the end time will be for the following day.
Settings 00:00 - 23:59
Default values —
Description Configure the number of the call group to switchover.
Settings 01 - 10
Default values —
Description Configure the call priority.
Settings • Normal
• Priority
• Urgent
Default values —
To Next Page
Loading...
Need help?
General
