94
Configuring the Station
How to configure Daily Schedule
Configure the switchover time, call group number, and call priority for the outgoing call destination, in units of one day.
A schedule one year from the set day can be configured. 12 schedules can be set for each day.
1. Select the day for which to set a schedule from "Calendar."
2. Configure "Start Time," "End Time," "Call Destination," and "Priority," and then click [Add].
3. When done, click [Update].
■ Start Time
■ End Time
■ Call Destination
Description Configure the time when call group switchover begins.
Settings 00:00 - 23:59
Default values —
Description Configure the time to end call group switchover. If this is set earlier than “Start Time
(→page 94)”, the end time will be for the following day.
Settings 00:00 - 23:59
Default values —
Description Configure the number of the call group to switchover.
Settings 01 - 10
Default values —
Calendar
Set schedule list
To Next Page
Loading...
Need help?
General
