84
Settings and Adjustments
Configuring the device on a PC
4
Communication
*1 Indicates a required field. The settings should be entered. Retain the default values, unless a change is necessary.
Entry Description Settings Default values
Talk Timeout [sec]
*1
Configure the call duration when making an
outgoing call from this station or answering a
call from an incoming page. The call
duration during an incoming call will be the
call duration configured on the other station.
• 30-600 sec: Choose this to
set a time between 30 and
600 sec (1 sec step).
• Infinite: Do not end until
end operation occurs.
60sec
Communication Start
Tone
Configure the tone heard on this device
when a call is started.
• None
• Call Pattern1
• Call Pattern2
• Call Pattern3
• Call Pattern4
• Call Pattern5
• Call Pattern6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone1
• Pre Tone2
• Pre Tone3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select from the audio
sources registered in
“Custom Sound Registry
(→page 52)”.
None
Important
• When on a call with a VoIP Phone, this will be the call duration configured on the VoIP Phone.
To Next Page
Loading...
Need help?
General
