57
How to use
Transfer
3
3. When the transferring station
hangs up, the call is transferred
and communication can begin.
• For how to view the screen during a call, refer
to (→page 18).
• Refer to (page 60 through page 69) for
operations during a call.
4. To end the communication, hang
up the handset or tap .
Note
• Transferring a call from a station with a camera will transfer
the video as well.
• If communication is ended at the transfer destination
before the transferring station, the transfer will not be
completed.
• The call will not be automatically answered even if Auto
Answer
(→page 80) is set to "ON." Tap to answer.
• Depending on the setting, if the electrical lock is released
during incoming calls from the Entrance Station or while
communicating, the incoming call or communication will
end automatically after approximately 10 seconds.