Aiphone IXG System - Page 85

85
Settings and Adjustments
Configuring on the station
4
CHIME Set the sound for chime. • None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue
Notification
• Waiting Reply Tone
• Select a sound that is
registered in IXG
Support Tool.
None
TIME Set the Time to ring Chime. 00:00 - 23:59 -
Relay Output (administrator privileges only)
*3
Relay Output 1
FUNCTION Select the function of the
Relay Output.
• None
• Status Output: Relay
Output during the
status. The details
setting can be set in
“How to configure the
Status Output
(→page 106)”.
• Door Release: Relay
output when door
release is activated or,
entering the
authentication key
using keypad of the
station or the VoIP
Phone. Refer to
“How
to configure Door
Release settings
(→page 107)” for
information on how to
configure this. If a door
release operation is
performed on another
station, the electrical
lock will not be
released unless
"Code" is configured.
Be sure to configure
"Code" via Web
configuration or the
IXG Support Tool.
None
Entry Description Settings Default values