Aiphone IXG System - Page 91

91
Settings and Adjustments
Configuring on the station
4
*1 If "LOCK TRANSFER SETTINGS" is set to "ON" in administrator privileges settings, this cannot be configured under user
privileges.
*2 Video/audio cannot be recorded even if configured if no microSD card is inserted. Refer to
“About microSD card (→page 26)”
for details.
*3 The following three relay output methods are available and redundant configuration is possible for each output terminal. If
multiple commands occur during a single relay output, the latest command will take priority.
– Functions selected in "Relay Output" - "Relay Output 1" or "Relay Output 2" - "FUNCTION."
– Functions selected in "Relay Output" - "Relay Output 1" or "Relay Output 2" - "OPTION RELAY CONTROL."
– Functions selected in "Relay Output 1 Schedule" or "Relay Output 2 Schedule."
*4 This is an administrator privileges setting. If configuring the Speed Dial buttons is restricted, this cannot be configured under
user privileges.
*5 When [Factory Reset] is selected and the settings are initialized, it may take around 10 minutes to finish restarting. The
station cannot be used until it has finished restarting.
Recording files saved in microSD cards will not be deleted. If deleting recording files, delete from History (page 32).
Factory Reset
*5
Default User Settings The data that can be
configured on the screen
will be initialized. Settings
restricted under
administrator privileges will
not be initialized. The
Incoming/Outgoing/Missed
calls history will also be
cleared.
--
Factory Reset (administrator only) All settings will be
initialized, and the system
log and Incoming/Outgoing/
Missed calls history will be
cleared.
--
Entry Description Settings Default values