Aiphone IXG System - Page 90

90
Settings and Adjustments
Configuring on the station
4
Monitor Assign the monitoring or
scan monitoring function to
the Speed Dial button.
Scan monitoring cannot be
assigned unless scan
monitoring is configured in
“Monitor (→page 82)”.
Refer to
“How to configure
Speed Dial Settings
(→page 112)” for how to
configure this.
--
Relay Control Assign optional relay (a
function that controls the
output terminal of another
station) to the Speed Dial
button.
Refer to
“How to configure
Speed Dial Settings
(→page 112)” for how to
configure this.
--
RANGE
(TIMER)
Select the Output Time
Range for relay output, and
set the Timer within the
range.
• Momentary: The relay
continues to output
when the Speed Dial
button is pressed.
Pressing the Speed
Dial button again stops
relay output.
• 200 to 2000 msec:
Select this to set a
time between 200 and
2000 msec (by 200
msec).
Enter the time in
"TIMER."
• 3 to 600 sec: Select
this to set a time
between 3 and 600
sec (by 1 sec). Enter
the time in "TIMER."
Momentary
Edit Name Set the name of the Speed
Dial button.
1-24 alphanumeric
characters (Configure
"Button Name" of the
IXG Support Tool
Settings if inputting full-
width characters.) The
set name is displayed on
the Speed Dial.
The entire name may not
be displayed, depending
on the type of Home
screen and number of
characters.
-
Entry Description Settings Default values