89
Settings and Adjustments
Configuring on the station
4
RINGTONE Select the volume for
Ringtone and Paging
Pretone. The ringtone will
sound at that volume, each
time the setting value is
changed.
0: Mute, 1 - 10 6
BUTTON FEEDBACK Select Enable / Disable for
Button Feedback tone.
•ON
• OFF
ON
Speed Dial
*4
Favorites 1 to 8
Call Assign the calling function
to the Speed Dial button.
Refer to
“How to configure
Speed Dial Settings
(→page 112)” for
information on how to
configure this.
--
Page Assign the paging function
to the Speed Dial button.
Refer to
“How to configure
Speed Dial Settings
(→page 112)” for
information on how to
configure this.
--
Play Count Set the play count of the
message set in "Name."
1-20 times 1 time
Name Select the message (audio
file) to send during
message paging.
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue
Notification
• Waiting Reply Tone
• Select a sound that is
registered in IXG
Support Tool.
-
Entry Description Settings Default values
To Next Page
Loading...
