77
Configuring the Station
4.2.6 Send Test Email
Send a test email to the destination address specified in “Email Addresses (→page 74)”.
How to send a test email
1. Click [Send].
2. The following email is sent to the set email address.
Example of sending an email message:
When sending a test email from the station (Station Number: 010, Station Name: Multi-purpose Adapter 10).
From △△△△@△△△△△.com
Date and time 15:22 2018/11/20
To
CC
xxxx@xxxxx.com
Subject 010 Multi-purpose Adapter 10 Test Email
Text Test Email sent at "20181120 15:22:46."
Station Number: [010]
Station Name: [Multi-purpose Adapter 10]
Note
• "UTF-8" encoding is used for the "Subject." Depending on the email client, the characters may appear incorrectly. To avoid
this, set the encoding method to "UTF-8."
To Next Page
Loading...
