76
Configuring the Station
4.2.5 Periodic Log Transmission
■ Periodic Log Transmission
■ Periodic Log Transmit Time
■ Periodic Log Transmit Interval
■ Periodic Log Transmission Subject
Description Select Enable / Disable for send station log periodically.
Settings • Enable
• Disable
Default values Disable
Description Set the time to send the periodic log.
Settings From 00:00 to 23:59
Default values 00:00
Description Select the interval to send the periodic log.
Settings 1 day - 7 days
Default values 1 day
Description Set the email subject for Periodic Log Transmission. This is used for all destination addresses.
Settings 1 - 64 alphanumeric characters
Default values -
Important
• "UTF-8" encoding is used for "Periodic Log Transmission Subject." Depending on the email client, the characters may appear
incorrectly. To avoid this, set the encoding method to "UTF-8."