Aiphone IXW-MA - Page 80

80
Configuring the Station
4.4.3 SIF Settings
Configure SIF recipient and communication settings. 16 SIF settings can be configured.
■ Program Type
■ IPv4
■ IPv6
■ Destination Port
■ SSL
■ Connection
Note
• There are two ways to configure SIF communication: manually configuring settings or uploading a file in “SIF Communication
Settings (sif.ini) (→page 82)”. The latest setting will take priority.
Description Set the Program Type for SIF.
Settings 0000 - 1111
If this is set to "0000," "0001," or "0011," the
“Transmission Trigger (→page 81)” setting will be
disabled.
Default values —
Description Set the SIF IPv4 destination address.
Go to
“DNS (→page 60)” to set Hostname.
Settings 1.0.0.1-223.255.255.254 or hostname(1-64 alphanumeric characters)
Default values —
Description Set the SIF IPv6 destination address.
Go to
“DNS (→page 60)” to set Hostname.
Settings ::FF:0 - FEFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or hostname (1-64 alphanumeric
characters)
Default values —
Description Set the Port Number for destination.
Settings 1 - 65535
Default values —
Description Select Enable / Disable for SSL.
Settings • Enable
• Disable
Default values -
Description Select Socket / HTTP for connection.
Settings • Socket
• HTTP
Default values -