BRIDGE LIVE Video I/O and Streaming Appliance v1.12 93 www.aja.com
Chapter 8 – Initial System Setup and
Conguration
Overview
The first boot will guide you through a short setup, which is largely a verification
of selected options. Important items to select are the network interface where
the video data will flow in and out.
See these chapters for more information:
"Chapter 4 Basic Use Case: SDI to Streams Encoding" on page 25
"Chapter 5 Basic Use Case: Streams to SDI Decoding" on page 39
"Chapter 6 Basic Use Case: Simultaneous Bi-Directional Encoding and Decoding" on
page 47
"Chapter 7 BRIDGE LIVE Features and Interface Deep Dive" on page 72
" Configuration Summary" on page 99 regarding configuration of a DNS server, if
needed.
You will also be prompted to select which network interface’s default gateway
will be used as a default route (likewise for every interface). Figure 3 on page 15
shows the Dashboard view, which is the homepage of the UI.
What's In the Box?
• BRIDGE LIVE Quick Start Guide
• BRIDGE LIVE appliance, including:
• pre-installed rack-ears
• rack rails
• two power cables
As you unpack the shipping box, carefully examine the contents. Make sure you
received everything and that nothing was damaged during shipment. If you find
any damage, immediately notify the shipping service and supply them with a
description of the damage. AJA will repair or replace damaged items.
If you find shipping damage, contact your AJA dealer or distributor for details on
how to have your BRIDGE LIVE repaired or replaced.
NOTE: Save packing materials and the shipping box. If your BRIDGE LIVE ever requires
service or you move your system, use the packaging materials and box for safe
shipment.
To Next Page
Loading...