AJA BRIDGE LIVE - Audio; Closed Captions; Metadata; Creating and Loading Preset Configurations for Streams

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 89 www.aja.com
• Uncompressed 4:2:2; 8bit/10bit, up to 1080i60/720p30; 4:2:2; 8bit/10bit, up
to UltraHDp60 – AJA Corvid 44 12G BNC
• Generic single program MPEG transport stream
• Encapsulation – standard TR01, Evertz TR01, MediaLinks TR01, legacy
NetInsight TR01
• High-bit rate JPEG2000 – 4:2:2, 10bit/12bit, up to 3840x2160p60/i60
• H.262 – 4:2:0, 8bit, up to 3840x2160p60/i60
• H.264 – 4:2:2/4:2:0, 8bit/10bit, up to 3840x2160p60/i60
• H.265 – 4:2:0, 8bit/10bit, up to 3840x2160p60
Audio
• AES3 uncompressed (SMPTE 302M)
• MPEG2 audio
• AAC (ADTS, LATM)
• AC3
• E-AC3
Closed Captions
• SMPTE 2038 (608/708)
• EIA-708 or EIA-608 (in SDI)
Metadata
• LTC timestamps
• MPEG TS PCR
• Ad-markers – SCTE104 (in SDI)
• Pass-through capabilities
Creating and Loading Preset Configurations for
Streams
Presets
In order to avoid manually configuring Pipelines, you can save configuration
settings to a file. You can then load the saved configuration settings from the file
and instantly populate all the settings, saving time and potential configuration
errors.
Presets can also serve as a way to backup, clone or restore Pipeline configuration
settings.
These configuration files are stored in the .json structured file format.
To save as a preset
1. From the left column of Dashboard, click on the configured stream that
you want to save as a preset. The window opens showing the Input stream
configuration options and the Output stream mapping.
2. With the stream selected, or while hovering the mouse over the stream, a
vertical row of three dots displays along the right edge.