Akai CD-55 - Timer Controlled Playdack Oo; Headphone Listening & Output Level Control

pita enieicnsemtninini ee fill
Timer controlled playback
This CD player features a timer start function. When used in
combination with an optional audio timer, you can play back a
compact disc at a specific programmed time.
After loading the compact disc you wish to play back, set
the connected amplifier’s input selector to its CD position.
Leave all the power switches of the components on and
set the timer to the timer operation mode. The connected
components will be turned off automatically.
After timer controlled playback has finished, take out the com-
pact disc.
Note
@ Once the power is turned on with the audio timer, there will
be approximately 5 seconds before the CD player starts
playback.
@ The timer start function will begin once the power is turned
on. After this the CD player can be used as usual.
@ The timer start function will only start when a compact disc
is loaded. if you are not using the timer controlled function,
take out the compact disc from the CD player.
Headphone listening and output
8 level adjustment
Connecta pair of headphones to the PHONES jack and adjust
the playback volume with the PHONES/OUTPUT control.
The provided remote control unit can be used for the output
level adjustment including phones level and output level.
Press the VOLUME UP or DOWN buttons of the remote control
unit.
Caution
Listening at high volume levels for long periods of time may
damage your hearing.
Note for level adjustment
Set the PHONES/OUTPUT control to its maximum position
during recording when the VARIABLE jacks are used for con-
nections.
LINE OUT
VARIABLE
Connection cord
CD Player
Example power cord connections
CD player
Timer
Household AC outlet
Important!
The illustrated power plugs and cords are intended for
general reference only. The power plug and cord usedin
your country may differ from the illustrations. (Example;
U.K., Australia, U.S.A., Europe, etc.)
25-En
PHONES/OUTPUT control
PHONES jack