Akai CD-55 - Convenient Playback Features 2.0; Auto Edit Program Playback

Convenient playback features
{| Auto edit: Automatic edit program
1 playback
The auto edit system can be used for convenience when rec-
ording a CD on acassette tape. Using the cassette tape’s rec-
ording time information, the system edits the tracks on your
CD into programs that will fit within the recording length of
each side of the cassette tape you are using.
AKAL coroscs osc nuren 00-55
Before beginning
@ Check the cassette tape’s recording time (C-30, C-46,
C-60, C-90, etc.)
@ Press the M@ button before starting automatic edit pro-
gramming.
@ Set your amplifier to the CD recording mode.
@ Press the CLEAR button if the PROGRAM indicator
appears on the FL display.
@ |f the REPEAT indicator on the FL display, press the
REPEAT button to turn off it.
DIGITAL cree, orn om
1 Load the compact disc you wish to record.
2 Repeatedly press the TAPE button until the length of the
cassette tape you are using appears on the digital display.
The various tape lengths (C-30, C-46 etc.) will appear
alternately on the digital display as the TAPE button is
pressed.
3 Press the AUTO EDIT button.
ThelAlindicator and all tracks programmed for the first half
of the auto edit program will appear on the music calen-
dar. The digital display will show the remaining recording
time of the cassette tape being used.
4 To start automatic edit program playback
Press the [>/§f button after setting the cassette deck into
the recording mode.
When the 1st half of the program has been played
back
The CD player will go into the pause mode and the Hindi-
Cator will appear on the FL display.
Alltracks programmed for the second half of the auto edit
Program will automatically appear on the FL display. The
f8) indicator and programmed tracks will appear on the
music calendar and the digital display will show the
remaining recording time of the cassette tape.
Turn over the cassette and set the cassette deck to the
recording standby mode.
After setting the cassette deck to the recording mode
Press the [>/lI button to start the 2nd half of auto edit pro-
gram playback.
After all auto edit program tracks have been played
back
All tracks programmed for the second half of the auto edit
program will automatically appear on the FL display
again. The remaining recording time of the cassette tape
will also appear.
To play back the auto edit program again after replac-
ing the same recording time cassette tape
Press the SIDE A/B button to set the CD player for play-
back of the 1st half of the auto edit program and repeat the
above steps 4 to 7.
To cancel playback of the automatic edit
program
Press the CLEAR button.
All tracks contained on the CD and its total playback time will
appear on the FL display.
The EDIT and PROGRAM indicators will disappear.
When the CLEAR button is pressed during auto edit
playback
The CD player will go into the normal playback mode.