Akai CD-55 - Page 7

‘ a a Hae
(AT pemaiy PIL PITY /mocham 16 17 18 19 20
o> 00 recat @Y-B 1 2 3 4 §
_ mm sec aur/smace 6 7 8B 9 10
LB TOW TE VIE
@ POWER Button
(ON =/STANDBY m)
To turn the power on and off.
Attention
The POWER button is not a primary
power switch. Even when the POW-
ER button is set to STANDBY .m, the
power supply to this CD player is not
completely turned off. If you wish to
completely turn the power off, discon-
nect the power cord from the house-
hold AC outlet.
@ FL (Fluorescent) Display
Tells you what the CD player is doing.
© Disc Drawer
Load a compact disc here.
© AI PLAY/PAUSE Button
To start and stop playback tempo-
rarily.
© REMOTE SENSOR Window
For reception of the remote control
signal from the provided remote con-
trol unit RC-C55.
Keep away from strong light and
direct sunlight as this will interfere
with the remote control function.
@ HI Button
To stop playback.
@ PROGRAM Button
To set the CD player to the random
program mode.
CLEAR Button
To cancel all programmed tracks of
the random program or the automatic
edited program.
DISPLAY button
To display the total elapsed playback
time or total remaining playback time
on the digital display.
© Numeric Buttons (1 to 0,10 +)
For direct search of the track you wish
to play back and for programming for
random program playback.
© OUTPUT/PHONES Level Control
To adjust the PHONES jack output
and VARIABLE OUTPUT jacks levels.
@ PHONES Jack
For headphone listening.
® 4 OPEN/CLOSE Button
To open and close the disc drawer.
@® PEAK LEVEL CHECK Button
To search for the highest recorded
level on the loaded CD.
OUTPUT/ PHONES
4
AUTO EDIT Button
To set the CD player to the automatic
edit program playback mode.
TAPE Button
To select the length of the cassette
tapes for automatic edit program
operation.
SIDE A/B Select Button
To select the programmed tracks
after setting the automatic edit pro-
gram mode.
A~~B Repeat Button
For repeat playback of a specific sec-
tion of the CD.
REPEAT Button
For repeat playback of all tracks, ran-
dom program playback or random
playback.
RANDOM PLAY Button
To start random playback.
AUTO SPACE Button
To set the blank intervals between
tracks to a specific time (approxi-
mately
4
seconds)
for
uniformity
dur-
ing random program playback.
</> and /P P|
Buttons
<</>> Buttons
For manual search during playback.
</> Buttons
To skip tracks during playback.