100
This is a choice field with 2 options: VELOCITY and
DURATION. It is used to select which of these 2 parameters the
function will affect.
• The VALUE field:
This field works in conjunction with the ACTION field and sets the
number which will be used to change the velocities or durations.
• The ACTION field:
This is a choice field and has 4 options:
1. ADD "VALUE" TO EACH: This selection adds the
number in the VALUE field to each note in the range.
2. SUBTRACT "VALUE" FROM EACH: This selection
subtracts the number in the VALUE field from each
note in the range.
3. MULTIPLY EACH BY "VALUE" %: This selection
multiplies each note in the range by the number in the
VALUE field. A value of 100% = no change; values of
101 to 200% proportionally increase each note's
velocity; values of 0 to 99% proportionally decrease
each note's velocity value.
4. SET EACH TO "VALUE": This selection changes each
note in the range to the number in the VALUE field.
• SOFT KEY 1- <Execute>:
After you have entered the correct data in each of the above
fields, pressing this soft key performs the actual function.
Example: To reduce the velocity values of all notes in a track by
half, set the screen fields to the following values:
1. Set the TRACK field to the track you wish to
change;
2. Set the FROM field to the start of the sequence;
3. Set the TO field to the end of the sequence;
4. Set the CHANGE field to VELOCITY;
5. Set the VALUE field to 50;
6. Set the ACTION field to MULTIPLY EACH BY
`VALUE' %
7. Press <Execute>
To Next Page
Loading...
Need help?
General
