Akai MPC 60 User Manual

168
As the screen warns, loading this file will replace all existing system
parameters with the newly loaded file's settings. To load the file, press
<Load it>. After loading, the previous screen will be redisplayed.
Erasing files
• If <Erase it> is pressed, the following warning screen is presented,
asking you to verify that you want to erase the selected file:
If you are sure, press <Erase it>, and the file will be erased permanently
from the disk. Once erased, the previous screen is redisplayed.
Renaming files
• If <Rename> is pressed, the following screen is displayed:
Rename a file
Rename the file:MY_FAVORITE_SONG.SEQ
to the new name:MY SONG .SEQ
<Rename it>
The upper line shows the current name of the file. The cursor rests in the
lower line, waiting for you to enter the new name. To enter the new name,
use the same method as in namin
g
a se
q
uence:

Akai MPC 60 Specifications

General

Manufacturer	Akai
Model	MPC 60
Release Year	1988
Sampling Rate	40 kHz
Bit Depth	12-bit
Polyphony	16 voices
Memory	750 KB (expandable to 1.5 MB)
Storage	3.5" floppy disk drive
Type	Sampler/Sequencer
Sequencer	Yes
Pads	16 velocity-sensitive pads
MIDI	In/Out/Thru
Maximum Sampling Time	13.1 seconds
Display	LCD
Outputs	8 individual outputs, stereo output
Inputs	2 inputs