Section 6: Sampling and editing sounds
149
6.9 Mixer modes, What decay thresholds, muitipitch
mode
Option 8 from the SOUNDS screen, "Mixer/hihat/other", displays a
single screen which provides access to the following functions related to
drum sounds:
• Setting the stereo mixer mode (SEQUENCE or MASTER).
• Setting the echo mixer mode (SEQUENCE or MASTER).
• Using the stereo mixer as an automated mixer, remembering all changes
made while recording.
• Using the echo mixer as an automated mixer, remembering all changes
made while recording.
• Setting the point at which the hihat decay slider switches to each of the 3
hihat sounds.
• Setting the midi controller number for the hihat decay.
• Setting the 16 LEVELS key to provide either 16 volume levels or 16
tunings ("mufti-pitch" mode).
To view this screen, press the SOUNDS key, and type an 8 to select the
"Mixer/hihat /other" option, and the following screen will be displayed:
There are three sections to this screen:
The MIXER MODES section:
This section contains four fields:
• The STEREO MIX field:
The stereo mixer may be set in this field to one of two main modes:
1. SEQUENCE:
2. There is a set of stereo mix settings stored within each
sequence. If the stereo mix mode is set to SEQUENCE, these
internal settings are used. In this mode, all mixer settings and
changes are stored to disk with the sequence, and when a new
sequence number is selected, these settings are automatically
loaded into the SEQUENCE mix settings.
To Next Page
Loading...
Need help?
General
