Akai MPC 60 User Manual

7.10 "Attention" messages encountered during
disk operations:
There are a number of special "Attention" screens which will appear
during disk operations if either the operator is doing something incorrect,
or an error is detected on the disk. Here is an example:
When an "Attention" screen such as this is displayed, the current
operation is suspended, awaiting an action from the operator. In each
case, the problem is described, a suggested solution is given, and a special
technical error code is given (This is to help the service technician over
the phone, should a problem arise). Also, one soft key usually exists to
allow a
p
ath to
p
roceed.
172

Akai MPC 60 Specifications

General

Manufacturer	Akai
Model	MPC 60
Release Year	1988
Sampling Rate	40 kHz
Bit Depth	12-bit
Polyphony	16 voices
Memory	750 KB (expandable to 1.5 MB)
Storage	3.5" floppy disk drive
Type	Sampler/Sequencer
Sequencer	Yes
Pads	16 velocity-sensitive pads
MIDI	In/Out/Thru
Maximum Sampling Time	13.1 seconds
Display	LCD
Outputs	8 individual outputs, stereo output
Inputs	2 inputs