Akai MPC 60 User Manual

6. Press STOP to stop playing.
7. Press TIMING CORRECT and select "1/32 TRPLT" in the NOTE field.
8. Press MAIN SCREEN to return to the PLAY/RECORD screen.
9. Enter OVERDUB mode again.
10. While holding TIMING CORRECT, also hold the SNAREI pad, varying
the pressure as you hold it. You should hear a snare drum roll.
This same procedure can be used in exactly the same way when
recording keyboard sequences. In this case, hold TIMING
CORRECT while holding the key on the midi keyboard. In order to
use the varying pressure technique, you will need to use a keyboard
which sends "channel pressure" messages.
60

Akai MPC 60 Specifications

General

Manufacturer	Akai
Model	MPC 60
Release Year	1988
Sampling Rate	40 kHz
Bit Depth	12-bit
Polyphony	16 voices
Memory	750 KB (expandable to 1.5 MB)
Storage	3.5" floppy disk drive
Type	Sampler/Sequencer
Sequencer	Yes
Pads	16 velocity-sensitive pads
MIDI	In/Out/Thru
Maximum Sampling Time	13.1 seconds
Display	LCD
Outputs	8 individual outputs, stereo output
Inputs	2 inputs