Akai QZ-503R Series

Timer wake
Timer wake using the TUNER, TAPE, CD or MD sources is
possible. This feature is convenient for waking yourself up in
the morning.
1
2
Load the tape or disc into the playback component.
If using the tuner, select the preset CH that you want.
Press the remote control’s TIMER button.
“SLEEP” will appear on the FL display.
Turn the JOG dial to select “WAKE”.
The display will change continuously as follows when
the JOG dial is turned.
[SLEEP] <> Lwaxe]
(GLOOK) <> REC |
Press the SET button.
The timer wake turn on time setting display will appear
on the FL display.
Hour Minutes
¢ Turn the JOG dial to input the flashing hour and
press the SET button.
¢ Turn the JOG dial to input the flashing minutes.
Hour Minutes
Press the SET button.
The timer wake playback turn off time setting display
will appear on the FL display.
Hour Minutes
¢ Turn the JOG dial to input the flashing hour and
press the SET button.
¢ Turn the JOG dial to input the flashing minutes.
6
Press the SET button.
The playback component will appear on the FL display.
e Turn the JOG dial to select the playback compo-
nent.
= <>)
np) <> TAPE]
Press the SET button to finish programming.
Press the © / | button to turn the power off.
Press the TIMER button to display the “{j” and
« [J indicators on the FL display.
i To cancel timer wake press the TIMER button while
the power is off.
The " ” and “ J” indicators will disappear from the FL
display, and timer wake will be cancelled.
33