Akai QZ-503R Series

32
Timer
controlled
features
There
are
three
types
of
timer
controlled
functions
that
make
6
Press
the
SET
button.
use
of
the
system's
built-in
clock.
The
turn
off
time
setting
display
will
appear
on
the
FL
©
Timer
recording
display.
® Timer wake
® Sleep timer
Although operation of each timer mode is limited to one time,
the last programmed timer mode will be memorized.
MD
DISPLAY
Hour
Minutes
© Turn the JOG dial to input the flashing hour and
press the SET button.
© Turn the JOG dial to input the flashing minutes.
SET —-*
7 ~‘Press the SET button.
The recording component indicator, “TAPE/MD”, will
flash on the FL display.
Timer recording
A radio broadcast can be timer-controlled for recording to a
tape or MD.
1 Press the TUNER button to select the “TUNER”
source input, and select the preset channel of the
station to be recorded.
© Select TAPE, MD or both with the JOG dial.
8 Press the SET button to finish programming.
2 Load the tape or MD for recording. Load both to
record on both simultaneously. —
3
Press
the
remote
control’s
TIMER
button.
10
Press
the
TIMER
button
to
display
the
“[@”
and
“SLEEP”
will
appear
flashing
on
the
FL
display.
“
J”
indicators
on
the
FL
display.
i <-> [WAKE]
(GLOCK) «> REC
Q Press the ©/| button to turn the power off.
ae Current time
4
Turn
the
JOG
dial
to
select
“REC”.
M
To
cancel
timer
recording
press
the
TIMER
button
while the power is off.
The “ fj” and “ J” indicators will disappear from the FL
display, and timer recording will be cancelled.
5 Press the SET button.
The timer recording indicator and turn on time setting
display will appear on the FL display.
Hour Minutes
© Turn the JOG dial to input the flashing hour and
press the SET button.
® Turn the JOG dial to input the flashing minutes.
Hour Minutes