Akai QZ-503R Series

CD playback
12cm CD
CD playback
Press
the
CD
button
to
select
to
“CD”
source
input.
Playback
will
start.
2
Press
the
m
button
to
stop
playback.
Note:
®
Do
not
load
any
disc
other
than
a
music
CD.
When
“CD"
source
input
is
selected,
the
remote
control’s
basic
operation
buttons
can
be
used
to
contro!
CD
opera-
tions.
datneesttetevetctee. Playback/pause button
ME
/
<4,
Fast
reverse/back
skip
button
taal
hot
as
Fast
forward/forward
skip
button
M1
Bs
aenncek,
Stop/tray
open/close
button
e Place the CD on the disc tray, label side up.
© Make sure that the CD is placed properly within the
grooves of the tray. Both 12cm and 8cm single CDs can
_ be loaded.
Press the & button to open/close the disc tray.
Only music CDs that include the following mark can be
played back on this unit.
COMPACT
DIGITAL AUDIO
Direct search
The
remote
control's
10
key
buttons
can
be
used
to
start
playback
from
a
specific
track.
M@ Using the 10 keys:
© To start playback from track 4:
Press the 4 button.
© To start playback from track 10:
Press the +10 button once, then press the 0 button.
© To start playback from track 25:
Press the +10 button twice, then press the 5 button.
Skip search / Manual search
@ Skip search
TRACK 3 TRACK 4 TRACK 5 i
>> PP
Keg 5 (Current
position
e
Press
the
>
/
PP!
button
to
skip
to
the
start
of
the
next
track.
® Press the Ké< / <4 button to skip to the start of the
current playback track. Keep pressing the Kal / <<
button to skip tracks in the reverse direction.
¢ Tracks can also be skipped by turning the JOG dial.
@ Manual search
TRACK 3 TRACK 4 | TRACK5 \
<<< Current > pp
position
e Press and hold the ® / PPI button for fast forward
search.
e Press and hold the Kd / <4 button for fast reverse
search.