— 30 —
To Take Videos
Motion Recordings
w
PINCH AND ZOOM: To zoom in or out,
use the simple pinch and zoom gesture
with this app.
u
Motion Enable is the default setting. When motion is detected on the video camera,
the camera will automatically record 5 to 30 seconds depending on the Recording
Cycle setting on page 45, and then stop recording. To turn off the Motion Enable, go to
Advanced settings (page 44).
Camera Speaker Features
u
MUTE/UN-MUTE: When in the SightHD
App, tap the Speaker icon to hear the
sound of the camera’s microphone through
the SightHD App. Tap again to mute the
sound.
REMOTE ACCESS
To Next Page
Loading...
Need help?
General
