Additional features
8AL90627ENAA ed02 35 /45
3.7 Network/Network Transfer
This feature is used to interconnect two external callers via the installation, while retaining the
ability to release the connection.
When this feature is programmed by the system administrator, he/she can put the
Network/Network Transfer key on the Perso page or on the extension module (ALE-120, EM200 or
virtual module on ALE-500).
Following an incoming call, the attendant makes an outgoing call to a party. The first party is
automatically put on hold.
On extension module (ALE-120)
1.
The following page is displayed: Next.
2. Open the Perso page (select the tab or
use the left navigation key).
3. Net/Net
The two parties are connected and
supervision is activated.
In steady state.
4. Net/Net
Press the key again.
The attendant barges in the conversation
after a barge-in tone.
Flashes.
5. Net/Net
Press the key again.
The attendant is back to supervision.
In steady state.
1. Net/Net
The two parties are connected and
supervision is activated.
In steady state.
2. Net/Net
Press the key again.
The attendant barges in the conversation
after a barge-in tone.
Flashes.
3. Net/Net
Press the key again.
The attendant is back to supervision.
In steady state.
Once the connection is released, there is no icon next to the Network/Network Transfer key.
To Next Page
Loading...
