Enhanced Subscriber Management (ESM) Accounting
Page 154 7750 SR RADIUS Attributes Reference Guide
26-6527-12 Alc-Subsc-Prof-Str The subscriber profile is a template which contains settings (accounting,
igmp, HQoS, etc.) which are applicable to all hosts belonging to the same
subscriber were [26-6527-12] Alc-Subsc-Prof-Str is the string that maps
(configure subscriber-mgmt sub-ident-policy sub-profile-map) to such an
subscriber profile (configure subscriber-mgmt sub-profile <subscriber-
profile-name>). Strings longer than the allowed maximum are treated as setup
failures. Unreferenced strings (string does not map to a policy) are silently
ignored and a fallback to pre-configured defaults is done. Attribute is omitted
in accounting via configure subscriber-mgmt radius-accounting-policy
<name> include-radius-attribute no sub-profile.
26-65 2 7- 1 3 Alc-SLA- Prof - S tr The SL A profile is a template which contains settings (filter, QoS, host-
limit...) which are applicable to individual hosts were [26-6527-13] Alc-SLA-
Prof-Str is the string that maps (configure subscriber-mgmt sub-ident-
policy <sub-ident-policy-name> sla-profile-map) to such a sla profile
(configure subscriber-mgmt sla-profile <sla-profile-name>). Strings longer
than the allowed maximum are treated as setup failures. Unreferenced strings
(string does not map to a policy) are silently ignored and a fallback to pre-
configured defaults is done. Attribute is omitted in accounting via configure
subscriber-mgmt radius-accounting-policy <name> include-radius-
attribute no sla-profile.
26-6527-19 Alc-Acct-I-Inprof-
Octets-64
Indicates how many queue|policer ingress forwarded bytes have been handled
for this user over the course of this service being provided.
• queue|policer stat-mode = *:
Count in-profile bytes (IPv4 and IPv6)
[26-6527-107] Alc-Acct-I-statmode VSA only included for policers
• queue|policer stat-mode = v4-v6:
Count IPv4 bytes (in- and out-of-profile)
[26-6527-107] Alc-Acct-I-statmode VSA included for policers and
queues with value v4-v6
The attribute is included when detailed queue/policer statistics VSAs are
configured. (configure subscriber-mgmt radius-accounting-policy <name>
include-radius-attribute detailed-acct-attributes).
Table 52: Enhanced Subscriber Management Accounting (description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
