Alcatel-Lucent 7750 - Distributed Subscriber Management (DSM) Accounting; Table 55: Distributed Subscriber Management Accounting (Applicability)

Distributed Subscriber Management (DSM) Accounting
Page 190 7750 SR RADIUS Attributes Reference Guide
Distributed Subscriber Management (DSM) Accounting
In Distributed Subscriber Management (DSM), a single accounting session per UE is started. A
unique Accounting-Session-ID per UE is generated. An Acct-Multi-Session-Id is also generated
but currently not used to link any accounting sessions.
Acct-Status-Type and Acct-Session-Id are always included by default. The presence of all other
attributes is dictated by configuration (configure>aaa>isa-radius-policy <name>>acct-include-
attributes). The attribute description and limits are the same as for Enhanced Subscriber
Management (ESM) Accounting (Table 52 and Table 53), Table 55 below provides an overview of
the applicability of the attributes in DSM accounting messages.
Accounting On and Accounting Off messages are generated when a server is enabled or disabled
in an isa-radius-policy (configure>aaa>isa-radius-policy <name> servers <id>>[no]
shutdown). An accounting-On will also be generated every 5 minutes for a RADIUS server that is
unresponsive.
Table 55: Distributed Subscriber Management Accounting (applicability)
Attribute ID Attribute Name Acct
Start
Acct
Stop
Acct
Interim-
Update
Acct On
(*)
Acct Off
(*)
1 User-Name 0-1 0-1 0-1 0 0
5 NAS-Port 0-1 0-1 0-1 1 1
8 Framed-IP-Address 0-1 0-1 0-1 0 0
9 Framed-IP-Netmask 0-1 0-1 0-1 0 0
25 Class 0-1 0-1 0-1 0 0
30 Called-Station-Id 0-1 0-1 0-1 0-1 0-1
31 Calling-Station-Id 0-1 0-1 0-1 0 0
32 NAS-Identifier 0-1 0-1 0-1 0-1 0-1
40 Acct-Status-Type 1 1 1 1 1
41 Acct-Delay-Time 0-1 0-1 0-1 0 0
42 Acct-Input-Octets 0-1 0-1 0-1 0 0
43 Acct-Output-Octets 0-1 0-1 0-1 0 0
44 Acct-Session-Id 1 1 1 1 1
46 Acct-Session-Time 0-1 0-1 0-1 0-1 0-1