Alcatel-Lucent 7750 - Table 50: Enhanced Subscriber Management Accounting [50] Acct-Multi-Session-ID Values

Enhanced Subscriber Management (ESM) Accounting
Page 142 7750 SR RADIUS Attributes Reference Guide
The Host or Session accounting session id can be included in a RADIUS Access Request:
configure
subscriber-mgmt
authentication-policy <policy-name>
include-radius-attribute acct-session-id [host|session]
The accounting session ID format that appears in RADIUS accounting messages can be
configured to a fixed 22 byte hexadecimal number format or a variable length description format:
configure
subscriber-mgmt
radius-accounting-policy <policy-name>
session-id-format {description|number}
An Acct-Multi-Session-Id is included in all RADIUS accounting messages (start/stop/interim):
The reporting of volume counters in accounting is coupled to the sending of periodic or host
triggered Accounting Interim Updates messages. Volume based accounting is therefore enabled
via the interim-update CLI parameter for all accounting modes and/or by the host-update CLI
parameter in session accounting mode as shown in Table 51.
Table 50: Enhanced Subscriber Management Accounting [50] Acct-Multi-Session-Id values
queue-instance-
accounting
host-accounting session-
accounting
[50] Acct-Multi-Session-Id
✓ xx
Not present
x ✓ x
Queue Instance Acct-Session-Id
xx✓
Queue Instance Acct-Session-Id
✓✓x
Queue Instance Acct-Session-Id
✓ x ✓
Queue Instance Acct-Session-Id
x ✓✓
Session Acct-Session-Id