Alcatel-Lucent 7750 - Table 69: Dynamic Data Service Accounting (Limits)

Dynamic Data Service accounting
Page 222 7750 SR RADIUS Attributes Reference Guide
Table 69: Dynamic Data Service Accounting (limits)
Attribute ID Attribute Name Type Limits SR OS Format
1 User-Name string 253 chars The format depends on authentication method and
configuration
For example: User-Name user1@domain1.com
4 NAS-IP-Address ipaddr 4 Bytes # ip-address
For example: NAS-IP-Address “192.0.2.1”
25 Class octets 253 chars64
chars
persistency
For example:Class = This is a Class attribute
32 NAS-Identifier string 32 chars For example:NAS-Identifier = PE1-Antwerp
40 Acct-Status-Type integer 4 1=Start, 2=Stop, 3=Interim Update,
7=Accounting-On, 8=Accounting-Off, 9=Tunnel-
Start, 10=Tunnel-Stop, 11=Tunnel-Reject,
12=Tunnel-Link-Start, 13=Tunnel-Link-Stop,
14=Tunnel-Link-Reject, 15=Failed
41 Acct-Delay-Time integer 4294967295
seconds
For example:# initial accounting start Acct-Delay-
Time = 0# no ack and retry after 5 secondsAcct-
Delay-Time = 5
44 Acct-Session-Id string 22 Bytes For example: # Acct-Session-Id =
24ADFF0000000950C5F138 Acct-Session-Id
0x32313238343633353932313032353132313133
343039
46 Acct-Session-Time integer 4
Bytes4294967
295 seconds
For example:Acct-Session-Time = 870
49 Acct-Terminate-
Cause
integer 4 Bytes Supported causes: 1=User-Request, 2=Lost-
Carrier, 3=Lost-Service, 4=Idle-Timeout,
5=Session-Timeout, 6=Admin-Reset, 8=Port-
Error, 10=NAS-Request, 15=Service-Unavailable
See also table Acct Terminate Cause for complete
overview
For example:Acct-Terminate-Cause = User-
Request
50 Acct-Multi-
Session-Id
string 22 bytes For example:Acct-Multi-Session-Id =
24ADFF0000000250C8EA5E
55 Event-Timestamp date 4 Bytes For example:# Jul 6 2012 17:28:23 CEST is
reported as 4FF70417Event-Timestamp =
4FF70417