RADIUS Attributes Reference
7750 SR RADIUS Attributes Reference Guide Page 225
CLI User Access Accounting
Table 71: CLI User Access Accounting (description)
Attribute ID Attribute Name Description
1 User-Name The name of user requesting user-Authentication, Authorization, Accounting.
User-names longer the allowed maximum Limit are treated as an
authentication failure.
4 NAS-IP-Address The identifying IP Address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv4.
The address is determined by the routing instance through which the RADIUS
server can be reached:
“Management” — The active IPv4 address in the Boot Options File (bof
address <ipv4-address>)
“Base” — The IPv4 address of the system interface (configure router
interface system address <address>). The address can be overwritten with
the configured source-address (configure system security source-address
application radius <ip-int-name|ip-address>)
31 Calling-Station-Id The IP address (coded in hex) from the user that requests Authentication,
Authorization, Accounting.
44 Acct-Session-Id A unique number generated per authenticated user and reported in all
accounting messages. Used to correlate CLI commands (accounting data)
from the same user.
61 NAS-Port-Type Mandatory included as type Virtual(5).
95 NAS-IPv6-Address The identifying IP Address of the NAS requesting the Authentication or
Accounting. Included when the RADIUS server is reachable via IPv6.
The address is determined by the routing instance through which the RADIUS
server can be reached:
“Management” — The active IPv6 address in the Boot Options File (bof
address <ipv6-address>)
“Base” — The IPv6 address of the system interface (configure router
interface system ipv6 address <ipv6-address>). The address can be
overwritten with the configured ipv6-source-address (configure system
security source-address application6 radius <ipv6-address>)
To Next Page
Loading...
