Subscriber Host Identification
Page 38 7750 SR RADIUS Attributes Reference Guide
Table 3: Subscriber Host Identification (limits)
Attribute
ID
Attribute
Name
Type Limits SR OS Format
1 User-Name string 253 chars Form depends on authentication method and
configuration.
For example: User-Name user1@domain1.com
2User-
Password
string 64 Bytes Encrypted password
For example: User-Password
4ec1b7bea6f2892fa466b461c6accc00
3 CHAP-
Password
octets 16+1 Bytes Users CHAP identifier 1 followed by the Encrypted
password
For example: CHAP-Password
01ef8ddc7237f4adcd991ac4c277d312e9
4 NAS-IP-
Address
ipaddr 4 Bytes # ipv4 address
For example: NAS-IP-Address=192.0.2.1
5 NAS-Port integer 4 Bytes nas-port <binary-spec>
<binary-spec> = <bit-specification> <binary-spec>
<bit-specification> = 0 | 1 | <bit-origin>
<bit-origin> = *<number-of-bits><origin>
<number-of-bits> = [1..32]
<origin> = o (outer VLAN ID), i (inner VLAN ID), s
(slot number), m (MDA number), p (port number or lag-
id), v (ATM VPI), c (ATM VCI)
For example: # configured nas-port
*12o*10i*3s*2m*5p for SAP 2/2/4:221.7 corresponds
to 000011011101 0000000111 010 10 00100
NAS-Port = 231742788
6 Service-Type integer 2 (mandatory
value)
PPPoE and PPPoL2TP hosts only
For example: Service-Type = Framed-User
7Framed-
Protocol
integer 1 (fixed value) PPPoE and PPPoL2TP hosts only
For example: Service-Type = PPP
8 Framed-IP-
Address
ipaddr 4 Bytes For example: # ip-address 10.11.12.13
Framed-IP-Address 0a0b0c0d
9 Framed-IP-
Netmask
ipaddr 4 Bytes For example: Framed-IP-Netmask = 255.255.255.255
#PPPoE residential
Framed-IP-Netmask = 255.255.255.0 #PPPoE
Business with IPCP option 144 support
Framed-IP-Netmask = 255.255.255.0 # IPoE
18 Reply-
Message
string 253 chars For example: Reply-Message
MyCustomizedReplyMessage