RADIUS Attributes Reference
7750 SR RADIUS Attributes Reference Guide Page 159
26-6527-70 Alc-Acct-I-Low-
Octets-Drop_64
A customized record and provides the flexibility to reduce the volume of data
generated, network operators can define the record that needs to be collected.
This attribute is generated when configure subscriber-mgmt radius-
accounting-policy <name> custom-record queue <queue-id> i-counters
low-octets-discarded-count is enabled. Customized records are available for
queues, not for policers.
Counts ingress dropped bytes:
• no queue stat-mode:
Count low-priority bytes (IPv4 and IPv6)
[26-6527-107] Alc-Acct-I-statmode VSA not included
• queue stat-mode = v4-v6:
Count IPv6 bytes (high- and low-priority)
[26-6527-107] Alc-Acct-I-statmode VSA included with value v4-v6
26-6527-71 Alc-Acct-I-High-Pack-
Drop_64
A customized record and provides the flexibility to reduce the volume of data
generated, network operators can define the record that needs to be collected.
This attribute is generated when configure subscriber-mgmt radius-
accounting-policy <name> custom-record queue <queue-id> i-counters
high-packets-discarded-count is enabled. Customized records are available
for queues, not for policers.
Counts ingress dropped packets:
• no queue stat-mode:
Count high-priority packets (IPv4 and IPv6)
[26-6527-107] Alc-Acct-I-statmode VSA not included
• queue stat-mode = v4-v6:
Count IPv4 packets (high- and low-priority)
[26-6527-107] Alc-Acct-I-statmode VSA included with value v4-v6
26-6527-72 Alc-Acct-I-Low-Pack-
Drop_64
A customized record and provides the flexibility to reduce the volume of data
generated, network operators can define the record that needs to be collected.
This attribute is generated when configure subscriber-mgmt radius-
accounting-policy <name> custom-record queue <queue-id> i-counters
low-packets-discarded-count is enabled. Customized records are available
for queues, not for policers.
Counts ingress dropped packets:
• no queue stat-mode:
Count low-priority packets (IPv4 and IPv6)
[26-6527-107] Alc-Acct-I-statmode VSA not included
• queue stat-mode = v4-v6:
Count IPv6 packets (high- and low-priority)
[26-6527-107] Alc-Acct-I-statmode VSA included with value v4-v6
Table 52: Enhanced Subscriber Management Accounting (description) (Continued)
Attribute ID Attribute Name Description
To Next Page
